Train
cleaning using HydrobreakÒ
Power
For the cleaning of
heavily contaminated trains HydrobreakÒ
Power is an ideal product. It can be used to remove the heavy fuel oil and tar
build-up that is often found on the walls of tankers and also on the under
carriages.
HydrobreakÒ
Power should be applied using hot pressure jetting machines at approximately 50°C,
it is always advisable to start washing from the top of the tank and work
downwards. For best results the HydrobreakÒ
Power should be left to penetrate for a period before rinsing off. Normally one
application will be sufficient to remove the contamination, but in cases of
extremely heavily contaminated surfaces it may require two treatments to remove
all of the contamination.