Cleaning in the Food industry using HydrobreakÒ 2000

Most food industry processes involve the use of oils, greases or fats as part of the process. It is often difficult to remove these fats without creating problems somewhere else. The biggest problem normally experienced is that of blocked drains and overloaded effluent treatment plants. HydrobreakÒ 2000 has been designed to alleviate both of theses problems.

HydrobreakÒ 2000 is a unique product which has been designed not only to remove oil, fat and grease deposits but also to aid in the degradation of such material, HydrobreakÒ 2000 also prevents the oils, fats and greases from solidifying once they have been removed from the contaminated surface. This ensures that the drains remain clear and fat free.

HydrobreakÒ 2000’s unique properties will also aid in the degradation of the hydrocarbon waste, it does this first of all by splitting the hydrocarbon molecules into smaller more readily digestible components. The next stage is that the HydrobreakÒ 2000 will feed the bacteria found in the drainage system and effluent digestion plants, creating a bacterial explosion. The bacteria are then more able to digest the waste converting it into environmentally acceptable by-products.

To clean down inside a food processing factory HydrobreakÒ 2000 is best applied using steam cleaning equipment. Then the solution should be left to work for five minutes before rinsing  down to the drainage system, again with steam cleaning equipment.