 |
|
||||||||||||||||||||
 |
||||||||||||||||||||
|
|
|
Your Questions about Hydrobreak® Answered - Part 2 |
|
How do I get all of those? |
|
The simplest way is to use a steam cleaning machine, floor scrubbing machine, ultrasonic bath, aqueous spray washing machine or a Butterworth spray washing system, using whichever apparatus that is best suited to your specific application. |
|
I haven't got any of those what should I use. |
| Don't worry Hydrobreak will give impressive results by hand application. |
|
What do you mean by hand applications? |
| Hand applications are when you use Hydrobreak without a machine i.e. with a brush or mop and bucket, rag or cloth or perhaps by a hand or back-pack sprayer. |
|
How do I mix the Hydrobreak? |
| Always add the water to the Hydrobreak in order to achieve a good mix. |
|
Do I just use fresh water? |
| Where possible use hot water, this can be fresh or seawater. |
|
When I'm cleaning using Hydrobreak where do I start? |
| It is always best to start cleaning at the furthest point from the drain, or if it is a vertical surface to be cleaned always start at the top and work your way down. |
|
When I'm finished what do I do? |
| The first thing to do is to rinse away all waste
waters to a suitable foul drain, interceptor, effluent treatment plant
or holding tank. All waste waters must be disposed of in accordance with local regulations. |
|
You state that Hydrobreak is
environmentally friendly and that it will not cause |
| This is true, but like any product it must not be allowed directly into surface water. |
|
What do you mean by that? |
| This simply means that any product entering surface water will have an impact, with Hydrobreak however it is possible to reduce this impact by passing the Hydrobreak and contaminants through a system allowing time for breakdown. |
|
Is continued on the next page. |
|
||||||||||||||||||||
|
||||||||||||||||||||
 |
|
| Technosol Ltd. Phone: +37 251 61 403 Fax: +37 26 777 937 E-mail: office@hydrobreak.com E-mail: sales@hydrobreak.com |