Combating oil spillage on the railways using HydrobreakÒ Power

HydrobreakÒ Power is a non-toxic, non-flammable product designed to clean up oil spills and oil contamination. It’s unique formulation ensures not only that there is an effective cleaning performance but also that the resultant waste is broken down into environmentally acceptable waste products i.e. carbon dioxide and water ensuring no subsequent damage to the environment.

HydrobreakÒ Power is formulated from a blend of organic based surfactants, organic acids, plant extracts and naturally occurring renewable organic solvents. This unique formulation prepares the oil contamination for treatment by naturally occurring micro-organisms found everywhere in the environment. It also acts as a stimulant for the micro-organisms providing a nutrient source which allows an accelerated growth rate, thus ensuring an increased concentration of the micro-organisms to allow degradation of the contamination.

The powerful formulation is effective even on the toughest types of oil based contamination such as tars and aged contamination, both from hard surfaces and porous surfaces such as concrete, gravel and sand.

Track and Ballast Pollution

Oil polluted track not only leads to poor ballast formation. It is also a serious safety hazard; especially where there is a combination of slippery, oil covered sleepers or walkways and a live rail. Prolonged contamination of ballast by oil can also result in pollution of groundwater as well as adjacent rivers and streams. 

HydrobreakÒ Power is particularly suitable for the removal of oil contamination from ballast and track-side areas. For heavily contaminated areas HydrobreakÒ Power should be sprayed over the contaminated area at the rate of one part HydrobreakÒ Power to four parts water (20%); for lighter contamination a one to twenty (5%) solution should be used. After treatment the area should simply be left to allow the HydrobreakÒ Power to act. The treatment should be repeated once weekly, or until there is no more visible evidence of oil contamination.

In order to prevent a recurrence of the contamination build up a maintenance programme may be introduced whereby the area can be sprayed on a monthly basis using a concentration level of 2% (1:50), or as otherwise indicated by visual evidence of contamination.

HydrobreakÒ Power will penetrate into the ballast and soil below and will continue to work therefore reducing the contamination levels in the soil below. In fact HydrobreakÒ Power will continue to work albeit more slowly, as long as there is hydrocarbon contamination present.

Other areas where HydrobreakÒ Power can serve a purpose within the railways.

Fuel storage tanks and bunded areas; for the removal of aged oil contamination from bund walls, concrete aprons and shingle-soakaways.

 Maintenance Depots and workshops; Workshop floors, gullies and equipment

Station and train halt areas; Emergency oil spills or derailments

Fuel transfer areas; All areas where oils and fuels might spill onto

Train washing; for the removal of oily deposits on trains and undercarriages

For further details of application information please contact your HydrobreakÒ agent.

Good Housekeeping

As a general guide, common sense and elementary good industrial housekeeping can do much to reduce oil pollution. Set procedures should be laid down and adhered to at all times for the safe handling and disposal of fuels, lubricating oils even in small quantities. Likely sources of oil spillage or leakage should be identified and monitored and spills should be dealt with promptly should they occur. Oil residues in drums and containers should be removed promptly and never left around site.

HydrobreakÒ Power should be kept on hand and its use incorporated into standard anti-pollution procedures. 

Disposal 

Under the Environmental Protection Act all those involved in a spillage whether in production, storage, transport, treatment or disposal have a duty of care to:

 Ø       Prevent illegal treatment and disposal of waste

Ø       Prevent escape of waste

Ø       Ensure that both the transport of the waste and its transporter are duly authorised

Ø       Provide a written description to accompany the waste

	Products - Introduction What makes Hydrobreak® unique Features and benefits Typical Hydrobreak® applications Range at a glance Quick guide to dilution rates Product selector Order online Technology Support Partners Contacts Back to main page
Technosol Ltd. Phone: +37 251 61 403 Fax: +37 26 777 937 E-mail: office@hydrobreak.com E-mail: sales@hydrobreak.com