Technosol Ltd.
 
How to use Hydrobreak® Power

  

Hydrobreak® Power is a very effective product designed for the removal of heavy oils, greases, tars and bitumastic substances. In order to achieve the best results the following application recommendations should be implemented.

  1. Always mix Hydrobreak® Power with water before use at least 50% product and 50% water. Hydrobreak® Power can actually be used in some applications with dilutions as high as 200:1.

  2. Always allow the product to remain in direct contact with the contamination for as long as possible before washing off.

  3. Wherever possible agitate the surface to ensure that the Hydrobreak® Power can penetrate into the contamination. This is particularly important when the contamination is very old and therefore more difficult to remove.

  4. For very heavy or aged contamination it may be necessary to apply Hydrobreak® Power again to achieve the desired results.

Briefly, always mix with at least one part water, then apply with a stiff brush to agitate the surface and leave for as long as possible before washing off and if necessary redo the application.

Technosol Ltd.
Phone: +37 251 61 403
Fax: +37 26 777 937
E-mail: office@hydrobreak.com
E-mail: sales@hydrobreak.com