|
||||||||||||||||||||
|
Health
and safety data sheets and information sheets for the HydrobreakÒ
Product Range
COMPANY
IDENTIFICATION: TechnoSol
Limited
HYDROBREAKÒ
2000
MARKET PLACE: As an alternative to dispersants, degreasers or detergents when dealing with hydrocarbons or oil pollution problems.
INDUSTRY
Water authorities, emergency services, oil distribution and manufacturing
and bioremediation.
PRODUCT A concentrated non-toxic hydrocarbon degrader
DESCRIPTION: with bio-acceleration properties. HYDROBREAKÒ 2000 has been formulated to have a high degree of cleaning/degreasing properties whilst still being totally biodegradable.
TYPICAL USES: HYDROBREAKÒ 2000 can be used as a cleaner degreaser along with the following additional applications. For use in conjunction with absorbents for dealing with hydrocarbon spills. For bioremediation and clean up of contaminated land. As part of a total hydrocarbon degrading package.
BENEFITS: Totally safe in use. Renders hydrocarbons non-flammable on application. Prevents grease and oil build-up. Aids biodegradation. Excellent cleaning/degreasing properties. Acts as a bioaccelerator for complete breakdown of hydrocarbons.
DILUTION RATES: Effective use up to 200:1
General minimum use 10:1
PACKAGING: 25 and 205 litre non-returnable containers.
TECHNICAL
INFORMATION DATA - HYDROBREAKÒ
2000
PHYSICAL FORM: LIQUID
COMPOSITION OF PRODUCT: AN AQUEOUS BLEND OF FULLY BIODEGRADABLE SURFACTANTS, ORGANIC ACIDS AND PLANT EXTRACTS
APPEARANCE: COLOURLESS WITH A PALE YELLOW TINGE
ODOUR: SLIGHT
MISCIBILITY WITH WATER: COMPLETE
SPECIFIC GRAVITY @ 20 DEG C: 1.044-1.048
P.H.: 5.5 +/- 0.5
BOILING POINT: 100 DEG. C
FREEZING POINT: 0 DEG. C
FLASH POINT: > 65 DEG. C NON-FLAMMABLE
FLASH POINT METHOD: TCC (TAG CLOSED CUP)
DEGRADABILITY: > 97% GERMAN LAW
TRANSPORT INFORMATION: THIS PRODUCT IS NOT CONSIDERED HAZARDOUS FOR TRANSPORT
STORAGE REQUIREMENTS: STORE IN PLASTIC CONTAINERS ABOVE 0 DEG.C
SAFETY REQUIREMENTS: THIS PRODUCT IS CLASSIFIED NON-HARMFUL
WHILST THERE ARE NO SPECIFIC RECOMMENDATIONS WITH REGARD TO HYDROBREAK 2000, PROTECTIVE GOGGLES AND GLOVES SHOULD BE WORN WHEN HANDLING ANY SUBSTANCE
SAFETY
DATA SHEET
1.
IDENTIFICATION OF THE PREPARATION
SUBSTANCE NAME:
HYDROBREAKÒ
2000
COMPANY NAME:
TechnoSol Ltd
EMERGENCY TELEPHONE NUMBER:
+ 372 51 61 403
2.
COMPOSITION/INFORMATION ON INGREDIENTS
INGREDIENT NAME
CONTENTS
HEALTH
RISK
(Class)
(R No.)
An aqueous blend of fully biodegradable
Surfactants, organic acids and plant extracts
none
none
3.
HAZARDS IDENTIFICATION
Not regarded as a health hazard under current legislation
4.
FIRST AID MEASURES
EYES:
Promptly wash eyes with lots of water while lifting the eyelids.
Get medical attention immediately. Continue to rinse.
SKIN:
Remove affected person from source of contamination.
Promptly flush contaminated skin with soap or mild detergent and water.
Promptly remove clothing if penetrated and flush the skin with water.
Get medical attention if irritation persists after washing.
INHALATION:
In the unlikely event of inhalation caused by faulty work practices, move
the exposed person to fresh air at once. Perform
artificial respiration if breathing has stopped.
Keep the affected person warm and at rest.
Get prompt medical attention.
INGESTION:
NEVER MAKE UNCONSCIOUS PERSON VOMIT OR DRINK FLUIDS! IF PERSON IS
CONSCIOUS, let affected person drink lots of water to dilute the swallowed
chemical. Seek medical attention.
5.
FIRE FIGHTING MEASURES
HYDROBREAK 2000 is non-flammable and would only cause problems under
extreme conditions
EXTINGUISHING MEDIA:
“alcohol” foam carbon dioxide (CO2), dry chemicals, sand,
dolomite, etc. are unaffected by HYDROBREAKÒ
2000
SPECIAL FIRE FIGHTING
Use water to keep exposed containers
PROCEDURES:
cool and disperse vapours. Water
spray may be used to flush spills away from exposures and dilute spills.
HAZARDOUS DECOMPOSITION
Toxic gases/vapours/fumes of carbon
PRODUCTS:
monoxide (CO) could be given off under extreme conditions
6.
ACCIDENTAL RELEASE MEASURES
SPILL CLEAN-UP METHODS:
Ventilate. Clean-up
personnel should use liquid contact protection.
Wash thoroughly after dealing with spillage.
SMALL SPILLS:
Absorb onto sand or other inert material and sweep up into suitable
container.
LARGE SPILLS:
Prevent the spillage from entering drains, ditches and rivers by use of
cellulose absorbents, sand or earth. Inform
local authorities if this cannot be prevented.
7.
HANDLING AND STORAGE
USAGE PRECAUTIONS:
Avoid spillage, skin and eye contact.
Avoid forming mists or fogs.
STORAGE PRECAUTIONS:
Store in plastic containers at temperatures above 0 degrees C. Keep
containers closed during storage.
8.
EXPOSURE CONTROLS AND PERSONAL PROTECTION
INGREDIENT NAME
STD
LT EXP
ST EXP
(8 hrs.)
(10 min.)
Does not apply
PROTECTIVE EQUIPMENT
Gloves and goggles should be worn when handling any chemical
RESPIRATORS:
No specific recommendations made.
PROTECTIVE GLOVES:
Use suitable protective gloves if risk of skin contact.
EYE PROTECTION:
Wear splash-proof eye goggles to prevent any possibility of eye contact.
9.
PHYSICAL AND CHEMICAL PROPERTIES
APPEARANCE:
Liquid colourless or with pale yellow tint
ODOUR/TASTE:
Slight
SOLUBILITY DESCRIPTION:
Miscible with water
SPECIFIC GRAVITY (water = 1):
1.020 @ 20C
FLASH POINT (C):
>65 degree C. This
product is non-flammable
FLASH POINT METHOD
TCC (Tag closed cup)
10.
STABILITY AND REACTIVITY
STABILITY:
No particular stability concerns
MATERIALS TO AVOID:
None
HAZARDOUS DECOMPOSITION
Toxic gases/vapours/fumes of carbon monoxide (CO) could be given off
under extreme conditions
11.
TOXICOLOGICAL INFORMATION
TOXIC DOSE 1 (LD 50):
No information available
TOXIC CONS. (LC 50):
HEALTH WARNINGS:
May be an irritant of eyes and mucous membranes after prolonged exposure
HEALTH SYMPTOMS:
Irritation of eyes and mucous membranes
ACUTE AND CHRONIC
No known chronic or acute health risks.
HEALTH HAZARDS:
12.
ECOLOGICAL INFORMATION
DEGRADABILITY:
>97% (German Law)
ACUTE FISH TOXICITY:
No information available
WATER HAZARD
May be slight pollutants based on reactants
CLASSIFICATION
13.
DISPOSAL CONDITIONS
DISPOSAL METHODS:
Confirm disposal procedures with environmental engineer and local
regulations
14.
TRANSPORT INFORMATION
UD No.:
This product is not considered hazardous
ADR CLASS No.:
for transport
AIR TRANSPORT CLASS:
-
AIR SUB-CLASS:
-
AIR PACK GR.:
-
HAZCHEM CODE:
-
SEA TRANSPORT CLASS No.:
-
SEA PACK GR.:
-
RAIL TRANSPORT CLASS No.:
-
CEFIC TEC (R) No.:
-
UK LABEL FOR CONVEYANCE:
-
PRODUCT COMMODITY CODE
3402 - 9010
15.
REGULATORY INFORMATION
LABEL FOR SUPPLY:
No classification given
RISK PHRASES:
Not classified
SAFETY PHRASES:
Wear suitable gloves and eye protection (recommended)
UK REGULATORY REFERENCES:
Health and Safety at Work Act 1974. The Control of Substances Hazardous
to Health Regulations 1988 Chemical (Hazard Information and Packaging)
Regulations
16.
OTHER INFORMATION
USER NOTES:
REVISION DATE:
1.10.00
REVISION NO./REPLACES
1/All previous health and safety
SDS ISSUED
data sheets
DISCLAIMER
THIS
INFORMATION RELATES ONLY TO THE SPECIFIC MATERIAL
DESIGNATED
AND MAY NOT BE VALID FOR SUCH MATERIAL USED IN COMBINATION WITH ANY OTHER
MATERIALS OR IN ANY PROCESS. SUCH
INFORMATION IS, TO THE BEST OF THE COMPANY’S KNOWLEDGE AND BELIEF,
ACCURATE AND RELIABLE AS OF THE DATE INDICATED.
HOWEVER, NOR WARRANTY, GUARANTEE OR REPRESENTATION IS MADE AS TO ITS
ACCURACY, RELIABILITY OR COMPLETENESS. IT
IS THE USER’S RESPONSIBILITY TO SATISFY HIMSELF AS TO THE SUITABILITY OF
SUCH INFORMATION FOR HIS OWN PARTICULAR USE.
HYDROBREAKÒ
PLUS
MARKET
PLACE:
For
use anywhere that storage space is at a premium or the use of a concentrate is
acceptable for dealing with hydrocarbon or aromatic pollution.
Industry effluent, treatment systems, spillage control kits, marine
applications, export markets.
PRODUCT
An
ultra concentrated non-toxic product capable
DESCRIPTION:
of
dealing with the cleaning of any oil, grease, fat or hydrocarbon problem.
HYDROBREAKÒ
PLUS also has the ability to stimulate bacterial activity to breakdown the
resultant effluent into harmless by-products, i.e. water and carbon dioxide.
TYPICAL
USES:
HYDROBREAKÒ
PLUS can be used to perform the same operations as HYDROBREAKÒ
2000 as well as the following. It
is an excellent product for use through dosing units in effluent treatment
plants for the breakdown of hydrocarbons. Anywhere
that the storage of, or transportation of, bulk chemicals can present a problem.
With HYDROBREAKÒ
PLUS being an ultra concentrate, it allows users to store or transport smaller
quantities of product that can subsequently be diluted to the desired strength
using either fresh or sea water.
BENEFITS:
Totally
safe in use. Renders hydrocarbons
non-flammable on application. Prevents
grease and oil build-up. Aids
biodegradation. Excellent cleaning
and degreasing properties. Ultra
concentrate allows for effective economical treatment of hydrocarbon and
aromatic waste.
DILUTION
RATES:
Effective
use up to 500:1 General minimum use 25:1
PACKAGING:
25
and 205 litre non-returnable containers
TECHNICAL
INFORMATION DATA - HYDROBREAKÒ
PLUS
PHYSICAL
FORM:
LIQUID
COMPOSITION
OF PRODUCT:
AN AQUEOUS BLEND OF FULLY BIODEGRADABLE SURFACTANTS, ORGANIC ACIDS AND
PLANT EXTRACTS
APPEARANCE:
COLOURLESS WITH A PALE YELLOW TINGE
ODOUR:
SLIGHT
MISCIBILITY
WITH WATER:
COMPLETE
SPECIFIC
GRAVITY @ 20 DEG C:
1.042-1.046
P.H.:
5.5 +/- 0.5
BOILING
POINT:
100 DEG. C
FREEZING
POINT:
0 DEG. C
FLASH
POINT:
> 65 DEG. C NON-FLAMMABLE
FLASH
POINT METHOD:
TCC (TAG CLOSED CUP)
DEGRADABILITY:
> 97% GERMAN LAW
TRANSPORT
INFORMATION:
THIS PRODUCT IS NOT CONSIDERED HAZARDOUS FOR TRANSPORT
STORAGE
REQUIREMENTS:
STORE IN PLASTIC CONTAINERS ABOVE 0 DEG.C
SAFETY
REQUIREMENTS:
THIS PRODUCT IS CLASSIFIED NON-HARMFUL
PROTECTIVE
GOGGLES AND GLOVES SHOULD BE WORN WHEN HANDLING HYDROBREAK PLUS.
SAFETY
DATA SHEET
1.
IDENTIFICATION OF THE PREPARATION
SUBSTANCE NAME:
HYDROBREAKÒ
PLUS
COMPANY NAME:
TechnoSol Ltd
EMERGENCY TELEPHONE NUMBER:
+ 372 51 61 403
2.
COMPOSITION/INFORMATION ON INGREDIENTS
INGREDIENT NAME:
CONTENTS
HEALTH
RISK
(Class)
(R No.)
An aqueous blend of fully biodegradable
surfactants, organic acids and plant extracts
Xi
36,38
3.
HAZARDS IDENTIFICATION:
Based on the properties of the reactants this product should be classed
as a mild irritant.
4.
FIRST AID MEASURES:
EYES:
Promptly wash eyes with lots of water while lifting the eyelids.
Get medical attention immediately. Continue to rinse.
SKIN:
Remove affected person from source of contamination.
Promptly flush contaminated skin with soap or mild detergent and water.
Promptly remove clothing if penetrated and flush the skin with water.
Get medical attention if irritation persists after washing.
INHALATION:
In the unlikely event of inhalation caused by faulty work practices, move
the exposed person to fresh air at once. Perform
artificial respiration if breathing has stopped.
Keep the affected person warm and at rest.
Get prompt medical attention.
INGESTION:
NEVER MAKE UNCONSCIOUS PERSON VOMIT OR DRINK FLUIDS! IF PERSON IS
CONSCIOUS, let affected person drink lots of water to dilute the swallowed
chemical. Seek medical attention.
5.
FIRE FIGHTING MEASURES
HYDROBREAK PLUS is non-flammable and would only cause problems under
extreme conditions
EXTINGUISHING MEDIA:
“alcohol” foam carbon dioxide (CO2), dry chemicals, sand,
dolomite, etc. are unaffected by HYDROBREAKÒ
PLUS.
SPECIAL FIRE FIGHTING:
Use water to keep exposed containers cool
PROCEDURES:
and disperse vapours. Water
spray may be used to flush spills away from exposures and dilute spills.
HAZARDOUS DECOMPOSITION
Toxic gases/vapours/fumes of carbon
PRODUCTS:
monoxide (CO) could be given off under extreme conditions
6.
ACCIDENTAL RELEASE MEASURES
SPILL CLEAN-UP METHODS:
Ventilate. Clean-up
personnel should use liquid contact protection.
Wash thoroughly after dealing with spillage.
SMALL SPILLS:
Absorb onto sand or other inert material and sweep up into suitable
container.
LARGE SPILLS:
Prevent the spillage from entering drains, ditches and rivers by use of
cellulose absorbents, sand or earth. Inform
local authorities if this cannot be prevented.
7.
HANDLING AND STORAGE
USAGE PRECAUTIONS:
Avoid spillage, skin and eye contact.
Avoid forming mists or fogs.
STORAGE PRECAUTIONS:
Store in plastic containers at temperatures above 0 degrees C. Keep
containers closed during storage.
8.
EXPOSURE CONTROLS AND PERSONAL PROTECTION
INGREDIENT NAME:
STD
LT EXP
ST EXP
(8 hrs.)
(10 min.)
PROTECTIVE EQUIPMENT:
Gloves and goggles should be worn when handling any chemical
RESPIRATORS:
No specific recommendations made.
PROTECTIVE GLOVES:
Use suitable protective gloves if risk of skin contact.
EYE PROTECTION:
Wear splash-proof eye goggles to prevent any possibility of eye contact.
9.
PHYSICAL AND CHEMICAL PROPERTIES
APPEARANCE:
Liquid colourless or with a pale yellow tint
ODOUR/TASTE:
Slight
SOLUBILITY DESCRIPTION:
Miscible with water
SPECIFIC GRAVITY (Water = 1):
1.044 @ 20C
FLASH POINT (C):
>65 degree C. This
product is non-flammable
FLASH POINT METHOD:
TCC (Tag closed cup)
10.
STABILITY AND REACTIVITY
STABILITY:
No particular stability concerns
MATERIALS TO AVOID:
None
HAZARDOUS DECOMPOSITION
Toxic gases/vapours/fumes of carbon
PRODUCTS
monoxide (CO) could be given off under extreme conditions
11.
TOXICOLOGICAL INFORMATION
TOXIC DOSE 1 (LD 50):
No information available
TOXIC CONS. (LC 50):
HEALTH WARNINGS:
May be an irritant of eyes and mucous membranes
HEALTH SYMPTOMS:
Irritation of eyes and mucous membranes
ACUTE AND CHRONIC
No known chronic or acute health risks
HEALTH HAZARDS:
12.
ECOLOGICAL INFORMATION
DEGRADABILITY:
>97% (German Law)
ACUTE FISH TOXICITY:
No information available
WATER HAZARD
May be slight pollutants based on
CLASSIFICATION:
reactants
13.
DISPOSAL CONDITIONS
DISPOSAL METHODS:
Confirm disposal procedures with environmental engineer and local
regulations
14.
TRANSPORT INFORMATION
UD No.:
This product is not considered hazardous
ADR CLASS No.:
for transport
AIR TRANSPORT CLASS:
-
AIR SUB-CLASS:
-
AIR PACK GR.:
-
HAZCHEM CODE:
-
SEA TRANSPORT CLASS No.:
-
SEA PACK GR.:
-
RAIL TRANSPORT CLASS No.:
-
CEFIC TEC (R) No.:
-
UK LABEL FOR CONVEYANCE:
-
PRODUCT COMMODITY CODE
3402 - 9010
15.
REGULATORY INFORMATION
LABEL FOR SUPPLY
RISK PHRASES:
-
SAFETY PHRASES:
37/39 Wear
suitable gloves and eye protection
26
In case of contact with eyes wash immediately with plenty of water and
seek medical advice
28
After contact with skin wash immediately with plenty of water.
UK REGULATORY REFERENCES:
Health And Safety At Work Act 1974. The Control of Substances Hazardous
to Health Regulations 1988 Chemical (Hazard Information and Packaging)
Regulations
16.
OTHER INFORMATION
USER NOTES:
REVISION DATE:
1.10.00
REVISION NO./REPLACES
1/All previous health and safety
SDS ISSUED:
data sheets
DISCLAIMER
THIS
INFORMATION RELATES ONLY TO THE SPECIFIC MATERIAL DESIGNATED AND MAY NOT BE
VALID FOR SUCH MATERIAL USED IN COMBINATION WITH ANY OTHER MATERIALS OR IN ANY
PROCESS. SUCH INFORMATION IS, TO
THE BEST OF THE COMPANY’S KNOWLEDGE AND BELIEF, ACCURATE AND RELIABLE AS
OF THE DATE INDICATED. HOWEVER, NOR
WARRANTY, GUARANTEE OR REPRESENTATION IS MADE AS TO ITS ACCURACY, RELIABILITY OR
COMPLETENESS. IT IS THE
USER’S RESPONSIBILITY TO SATISFY HIMSELF AS TO THE SUITABILITY OF SUCH
INFORMATION FOR HIS OWN PARTICULAR USE.
HYDROBREAKÒ
POWER
MARKET
PLACE:
As
an alternative to dispersants, degreasers or detergents for dealing with heavy
fuel oils and greases as well as aged oil contamination. Extremely effective in
soil cleaning applications.
Industry,
local authorities, tank cleaning, oil distribution and manufacturing and soil
cleaning companies.
PRODUCT
DESCRIPTION: A
concentrated non-toxic hydrocarbon degrader with bio-acceleration properties.
HYDROBREAKÒ
POWER has been formulated to be very effective on stubborn oils, greases, tars
and waxes, whilst at the same time being totally safe and environmentally
acceptable.
TYPICAL
USES:
HYDROBREAKÒ
POWER’S unique formulation allows it to be used for removing the toughest
deposits of heavy fuel oils, greases, tars, waxes and aged oil contamination.
It is especially recommended for tar manufacturers, road laying companies
and local authorities to clean tar spraying equipment and machinery, as well as
for the cleaning of heavy fuel and oil deposits from concrete. HYDROBREAKÒ
POWER should also be used for cleaning components, tanks, etc. contaminated with
heavy grease deposits, where excellent results will be achieved. It has also
been proved to be very effective in cleaning contaminated land.
BENEFITS:
Totally
safe in use. Renders hydrocarbons
non-flammable. Prevents grease and
oil build-up. Aids biodegradation. Excellent cleaning/degreasing properties.
Acts as a bioaccelerator for complete breakdown of hydrocarbons.
APPLICATION
METHODS:
Pressure washers/steam cleaner, floor scrubbing machines or by hand. By
injection or rotovator for soil cleaning
DILUTION
RATES:
Effective
use up to 100:1
General
minimum use 10:1
PACKAGING:
20
and 205 litre non-returnable containers
TECHNICAL
INFORMATION DATA - HYDROBREAKÒ
POWER
PHYSICAL
FORM:
LIQUID
COMPOSITION
OF PRODUCT:
AN AQUEOUS BLEND OF FULLY BIODEGRADABLE SURFACTANTS, ORGANIC ACIDS,
RENEWABLE NATURAL SOLVENTS AND PLANT EXTRACTS
APPEARANCE:
YELLOW/ORANGE
ODOUR:
DISTINCT
MISCIBILITY
WITH WATER:
COMPLETE
SPECIFIC
GRAVITY @ 20 DEG.C:
0.978
P.H.:
6.0 +/- 0.5
BOILING
POINT:
100 DEG. C
FREEZING
POINT:
0 DEG. C
FLASH
POINT:
> 65 DEG. C NON-FLAMMABLE
FLASH
POINT METHOD:
TCC (TAG CLOSED CUP)
DEGRADABILITY:
> 97% GERMAN LAW
TRANSPORT
INFORMATION:
THIS PRODUCT IS NOT CONSIDERED HAZARDOUS FOR TRANSPORT
STORAGE
REQUIREMENTS:
STORE ABOVE 0c
SAFETY
REQUIREMENTS:
THIS PRODUCT IS CLASSIFIED NON-HARMFUL
WHILST
THERE ARE NO SPECIFIC RECOMMENDATIONS WITH REGARD TO HYDROBREAK POWER,
PROTECTIVE GOGGLES AND GLOVES SHOULD BE WORN WHEN HANDLING ANY SUBSTANCE.
SAFETY
DATA SHEET
1.
IDENTIFICATION OF THE PREPARATION
SUBSTANCE NAME:
HYDROBREAKÒ
POWER
COMPANY IDENTIFICATION:
TechnoSol Ltd
Emergency
Telephone Number:
+ 372 51 61 403
2.
COMPOSITION/INFORMATION ON INGREDIENTS
INGREDIENT NAME
CONTENTS
HEALTH
RISK
(class)
(R No.)
An aqueous blend of natural renewable
solvents, fully biodegradable
surfactants, organic acids and plant extracts
XI
irritating to
respiratory
system and
skin
3.
HAZARDOUS IDENTIFICATION
Irritating to respiratory system and skin.
4.
FIRST AID MEASURES
EYES:
Promptly wash eyes with lots of water while lifting the eye lids.
Get medical attention immediately. Continue to rinse.
SKIN:
Remove affected person from source of contamination.
Promptly flush contaminated skin with soap or mild detergent and water.
Promptly remove clothing if penetrated
and flush the skin with water. Get
medical attention if irritation persists after washing.
INHALATION:
In the unlikely event of inhalation caused by faulty work practices, move
the exposed person to fresh air at once. Perform
artificial respiration if breathing has stopped.
Keep the affected person warm and at rest.
Get prompt medical attention.
INGESTION:
NEVER MAKE AN UNCONSCIOUS PERSON VOMIT OR DRINK FLUIDS! IF PERSON IS
CONSCIOUS, let affected person drink lots of water to dilute the swallowed
chemical. Seek medical attention.
5.
FIRE FIGHTING MEASURES
HYDROBREAK POWER is non-flammable and would only cause problems under
extreme conditions
EXTINGUISHING MEDIA
“alcohol” foam carbon dioxide (CO2), dry chemicals, sand ,
dolomite , etc. are unaffected by HYDROBREAKÒ
POWER
SPECIAL FIRE FIGHTING
Use water to keep exposed containers cool
PROCEDURES:
and disperse vapours. Water
spray may be used to flush spills away from exposures and dilute spills
HAZARDOUS DECOMPOSITION
Toxic gases/vapours/fumes of carbon
PRODUCTS:
monoxide (CO) could be given off under extreme conditions
6.
ACCIDENTAL RELEASE MEASURES
SPILL CLEAN-UP METHODS:
Ventilate. Clean-up
personnel should use liquid contact protection.
Wash thoroughly after dealing with spillage.
SMALL SPILLS:
Absorb onto sand or other inert material and sweep up into suitable
container.
LARGE SPILLS:
Prevent the spillage from entering drains, ditches and rivers by use of
cellulose absorbents, sand or earth. Inform
local authorities if this cannot be prevented.
7.
HANDLING AND STORAGE
USAGE PRECAUTIONS:
Avoid spillage, skin and eye contact.
Avoid forming mists or fogs.
STORAGE PRECAUTIONS:
Store at temperatures above 0 degrees C. Keep containers closed during
storage. Store in containers supplied.
8.
EXPOSURE CONTROLS AND PERSONAL PROTECTION
INGREDIENT NAME:
STD
LT EXP
ST EXP
(8 hrs.)
(10 min.)
PROTECTIVE EQUIPMENT
Protective gloves and goggles should be worn
RESPIRATORS:
No specific recommendations made
PROTECTIVE GLOVES:
Use suitable protective gloves if risk of skin contact.
EYE PROTECTION:
Wear splash-proof eye goggles to prevent any possibility of eye contact.
9.
PHYSICAL AND CHEMICAL PROPERTIES
APPEARANCE:
Yellow/orange
ODOUR/TASTE:
Distinct
SOLUBILITY DESCRIPTION:
Miscible with water
SPECIFIC GRAVITY (Water = 1):
0.978 @ 20C
FLASH POINT (C):
>65 degree C. This
product is non-flammable
FLASH POINT METHOD
TCC (Tag closed cup)
10.
STABILITY AND REACTIVITY
STABILITY:
No particular stability concerns
MATERIALS TO AVOID:
None
HAZARDOUS DECOMPOSITION
Toxic gases/vapours/fumes of carbon monoxide (CO) could be given off
under extreme conditions
11.
TOXICOLOGICAL INFORMATION
TOXIC DOSE 1 (LD 50):
No information available
TOXIC CONS. (LC 50):
HEALTH WARNINGS:
May be an irritant of eyes and mucous membranes.
HEALTH SYMPTOMS:
Irritation of eyes and mucous membranes
ACUTE AND CHRONIC
No known chronic or acute health risks
HEALTH HAZARDS:
12.
ECOLOGICAL INFORMATION
DEGRADABILITY:
>97% (German Law)
ACUTE FISH TOXICITY:
No information available
WATER HAZARD:
May be slight pollutant based on reactants
CLASSIFICATION
13.
DISPOSAL CONDITIONS
DISPOSAL METHODS:
Confirm disposal procedures with environmental engineer and local
regulations
14.
TRANSPORT INFORMATION
UD No.:
This product is not considered hazardous
ADR CLASS No.:
for transport
AIR TRANSPORT CLASS:
-
AIR SUB-CLASS:
-
AIR PACK GR.:
-
HAZCHEM CODE:
-
SEA TRANSPORT CLASS No.:
-
SEA PACK GR.:
-
RAIL TRANSPORT CLASS No.:
-
CEFIC TEC (R) No.:
-
UK LABEL FOR CONVEYANCE:
-
PRODUCT COMMODITY CODE
3402 - 9010
15.
REGULATORY INFORMATION
LABEL FOR SUPPLY:
- No irritant
RISK PHRASES:
Not classified
SAFETY PHRASES:
Wear suitable gloves and eye protection. (Recommended)
UK REGULATORY REFERENCES:
Health and Safety at Work Act 1974. The Control of Substances Hazardous
to Health Regulations 1988 Chemical (Hazard Information and Packaging)
Regulations
16.
OTHER INFORMATION
USER NOTES:
REVISION DATE:
1.10.00
REVISION NO./REPLACES
1/All previous health and safety
SDS ISSUED
data sheets
DISCLAIMER
THIS
INFORMATION RELATES ONLY TO THE SPECIFIC MATERIAL DESIGNATED AND MAY NOT BE
VALID FOR SUCH MATERIAL USED IN COMBINATION WITH ANY OTHER MATERIALS OR IN ANY
PROCESS. SUCH INFORMATION IS, TO
THE BEST OF THE COMPANY’S KNOWLEDGE AND BELIEF, ACCURATE AND RELIABLE AS
OF THE DATE INDICATED. HOWEVER, NOR
WARRANTY, GUARANTEE OR REPRESENTATION IS MADE AS TO ITS ACCURACY, RELIABILITY OR
COMPLETENESS. IT IS THE
USER’S RESPONSIBILITY TO SATISFY HIMSELF AS TO THE SUITABILITY OF SUCH
INFORMATION FOR HIS OWN PARTICULAR USE.
HYDROBREAKÒ
DR
MARKET
PLACE:
As
an alternative to solvents or high alkaline based detergents in cleaning and
degreasing processes involving metals including brass, copper and aluminium,
plastic or glass components. With
HYDROBREAKÒ
DR containing no chlorinated solvents, caustics, silicates or phosphates, it can
be used as a totally safe alternative in cleaning/degreasing baths or spray
systems. Manufacturing industry,
engineering, and service industry.
PRODUCT
DESCRIPTION: A
non-toxic low vapour fluid with non-foaming properties when used above 55°C.
HYDROBREAKÒ
DR has all the benefits of a totally safe product, with excellent
cleaning/degreasing performance.
TYPICAL
USES:
Hot
water spray cleansing and degreasing systems for the preparation of component
parts as part of manufacturing process.
BENEFITS:
Totally
safe in use (no caustics, solvents or silicates). Lasts longer than conventional
cleaners. Non-foaming must be used
above 55°C.
Prevents oil and grease and slime build-up in equipment. The use of HydrobreakÒ
DR also prevents the build up of scale in the wash plant, which ensures more
efficient wash plant operation, and it also keeps machinery cleaner during use
giving reduced maintenance costs for the equipment.
Prevents sludge build-up. Aids
biodegradation of oils, greases and other hydrocarbon material.
Very effective and economical in use. An environmentally acceptable
product which minimises otherwise expensive disposal costs. Can be used to clean
and brighten brass, aluminium.
DILUTION
RATES:
For
normal cleaning applications use at a 1-5% dilution ratio. For heavy
contamination and for use as a metal brightener use at 5-10%.
PACKAGING:
25
and 205 litre non-returnable containers
TECHNICAL
INFORMATION DATA - HYDROBREAKÒ
DR
PHYSICAL
FORM:
LIQUID
COMPOSITION
OF PRODUCT:
AN AQUEOUS BLEND OF FULLY BIODEGRADABLE NON-IONIC SURFACTANTS, ORGANIC
ACIDS AND PLANT EXTRACTS
APPEARANCE:
PALE YELLOW/BROWN
ODOUR:
SLIGHT
MISCIBILITY
WITH WATER:
COMPLETE
SPECIFIC
GRAVITY @ 20 DEG C:
1.028-1.032
P.H.:
6.0 +/- 1.0
BOILING
POINT:
100 DEG. C
FREEZING
POINT:
0 DEG. C
FLASH
POINT:
> 65 DEG. C NON-FLAMMABLE
FLASH
POINT METHOD:
TCC (TAG CLOSED CUP)
DEGRADABILITY:
> 97% GERMAN LAW
TRANSPORT
INFORMATION:
THIS PRODUCT IS NOT CONSIDERED HAZARDOUS FOR TRANSPORT
STORAGE
REQUIREMENTS:
STORE IN PLASTIC CONTAINERS ABOVE 0 DEG.C
SAFETY
REQUIREMENTS:
THIS PRODUCT IS CLASSIFIED NON-HARMFUL
WHILST
THERE ARE NO SPECIFIC RECOMMENDATIONS WITH REGARD TO HYDROBREAKÒ
DR, PROTECTIVE GOGGLES AND GLOVES SHOULD BE WORN WHEN HANDLING ANY SUBSTANCE
SAFETY
DATA SHEET
1.
IDENTIFICATION OF THE PREPARATION
SUBSTANCE NAME:
HYDROBREAKÒ
DR
COMPANYNAME:
TechnoSol Limited
EMERGENCY PHONE NUMBER:
+ 372 51 61 403
2.
COMPOSITION/INFORMATION ON INGREDIENTS
INGREDIENT NAME
CONTENTS
HEALTH
RISK
(class)
(R No.)
An aqueous blend of fully biodegradable
surfactants, organic acids and plant extracts
None
None
3.
HAZARDOUS IDENTIFICATION
Not regarded as a health hazard under current legislation.
4.
FIRST AID MEASURES
EYES:
Promptly wash eyes with lots of water while lifting the eye lids.
Get medical attention immediately. Continue to rinse.
SKIN:
Remove affected person from source of contamination.
Promptly flush contaminated skin with soap or mild detergent and water.
Promptly remove clothing if penetrated and flush the skin with water.
Get medical attention if irritation persists after washing.
INHALATION:
In the unlikely event of inhalation caused by faulty work practices, move
the exposed person to fresh air at once. Perform
artificial respiration if breathing has stopped.
Keep the affected person warm and at rest.
Get prompt medical attention.
INGESTION:
NEVER MAKE AN UNCONSCIOUS PERSON VOMIT OR DRINK FLUID! IF PERSON IS
CONSCIOUS, let affected person drink lots of water to dilute the swallowed
chemical. Seek medical attention.
5.
FIRE FIGHTING MEASURES
HYDROBREAK DR
is non-flammable and would only cause problems under extreme conditions
EXTINGUISHING MEDIA
“alcohol” foam carbon dioxide (CO2), dry chemicals, sand,
dolomite, etc. are unaffected by HYDROBREAKÒ
DR.
SPECIAL FIRE FIGHTING
Use water to keep exposed containers cool
PROCEDURES:
and disperse vapours. Water
spray may be used to flush spills away from exposures and dilute spills.
HAZARDOUS DECOMPOSITION
Toxic gases/vapours/fumes of carbon
PRODUCTS:
monoxide (CO) could be given off under extreme conditions.
6.
ACCIDENTAL RELEASE MEASURES
SPILL CLEAN-UP METHODS:
Ventilate. Clean-up
personnel should use liquid contact protection.
Wash thoroughly after dealing with spillage.
SMALL SPILLS:
Absorb onto sand or other inert material and sweep up into suitable
container.
LARGE SPILLS:
Prevent the spillage from entering drains, ditches and rivers by use of
cellulose absorbents, sand or earth. Inform
local authorities if this cannot be prevented.
7.
HANDLING AND STORAGE
USAGE PRECAUTIONS:
Avoid spillage, skin and eye contact.
Avoid forming mists or fogs.
STORAGE PRECAUTIONS:
Store in plastic containers at temperatures above 0 degrees C. Keep
containers closed during storage.
8.
EXPOSURE CONTROLS AND PER7SONAL PROTECTION
INGREDIENT NAME
STD
LT EXP
ST EXP
(8 hrs.)
(10 min.)
does not apply
PROTECTIVE EQUIPMENT
Gloves and goggles should be worn when handling any chemical
RESPIRATORS:
No specific recommendations made.
PROTECTIVE GLOVES:
Use suitable protective gloves if risk of skin contact.
EYE PROTECTION:
Wear splash-proof eye goggles to prevent any possibility of eye contact.
9.
PHYSICAL AND CHEMICAL PROPERTIES
APPEARANCE:
Liquid colourless or with A pale yellow tint
ODOUR/TASTE:
Slight
SOLUBILITY DESCRIPTION:
Miscible with water
SPECIFIC GRAVITY (Water = 1):
1.030 @ 20C
FLASH POINT (C):
>65 degree C. This
product is non-flammable
FLASH POINT METHOD
TCC (Tag closed cup)
10.
STABILITY AND REACTIVITY
STABILITY:
No particular stability concerns
MATERIALS TO AVOID:
None
HAZARDOUS DECOMPOSITION
Toxic gases/vapours/fumes of carbon monoxide (CO) could be given off
under extreme conditions
11.
TOXICOLOGICAL INFORMATION
TOXIC DOSE 1 (LD 50):
No information available
TOXIC CONS. (LC 50):
HEALTH WARNINGS:
May be an irritant of eyes and mucous membranes after prolonged exposure
HEALTH SYMPTOMS:
Irritation of eyes and mucous membranes
ACUTE AND CHRONIC
No known chronic or acute health risks
HEALTH HAZARDS:
12.
ECOLOGICAL INFORMATION
DEGRADABILITY:
>97% (German Law)
ACUTE FISH TOXICITY:
No information available
WATER HAZARD
May be slight pollutant based on reactants
CLASSIFICATION
13.
DISPOSAL CONDITIONS
DISPOSAL METHODS:
Confirm disposal procedures with environmental engineer and local
regulations
14.
TRANSPORT INFORMATION
UD No.:
This product is not considered hazardous
ADR CLASS No.:
for transport
AIR TRANSPORT CLASS:
-
AIR SUB-CLASS:
-
AIR PACK GR.:
-
HAZCHEM CODE:
-
SEA TRANSPORT CLASS No.:
-
SEA PACK GR.:
-
RAIL TRANSPORT CLASS No.:
-
CEFIC TEC (R) No.:
-
UK LABEL FOR CONVEYANCE:
-
PRODUCT COMMODITY CODE
3402 - 9010
15.
REGULATORY INFORMATION
LABEL FOR SUPPLY:
No classification given
RISK PHRASES:
Not classified
SAFETY PHRASES:
Wear suitable gloves and eye protection
UK REGULATORY REFERENCES:
Health And Safety At Work Act 1974. The Control of Substances Hazardous
to Health Regulations 1988 Chemical (Hazard Information and Packaging)
Regulations
16.
OTHER INFORMATION
USER NOTES:
REVISION DATE:
1.10.00
REVISION NO./REPLACES
1/All previous health and safety
SDS ISSUED:
data sheets
DISCLAIMER
THIS
INFORMATION RELATES ONLY TO THE SPECIFIC MATERIAL DESIGNATED AND MAY NOT BE
VALID FOR SUCH MATERIAL USED IN COMBINATION WITH ANY OTHER MATERIALS OR IN ANY
PROCESS. SUCH INFORMATION IS, TO
THE BEST OF THE COMPANY’S KNOWLEDGE AND BELIEF, ACCURATE AND RELIABLE AS
OF THE DATE INDICATED. HOWEVER, NOR
WARRANTY, GUARANTEE OR REPRESENTATION IS MADE AS TO ITS ACCURACY, RELIABILITY OR
COMPLETENESS. IT IS THE
USER’S RESPONSIBILITY TO SATISFY HIMSELF AS TO THE SUITABILITY OF SUCH
INFORMATION FOR HIS OWN PARTICULAR USE.
MARKET
PLACE:
As
an alternative to solvent based cleaning and degreasing processes involving
metal, glass and plastic components. With
HYDROBREAKÒ
HD containing no butyl or chlorinated solvents or caustics, it can be used as an
alternative in cleaning/degreasing baths or spray systems.
Manufacturing industry, engineering, servicing industry.
PRODUCT
DESCRIPTION: A
non-toxic low vapour fluid with non-foaming properties if used above 50°C
and built-in short-term rust inhibition properties.
HYDRBREAKÒ
HD has been designed to remove stubborn deposits of dirt, grease and grime.
TYPICAL
USES:
Hot
water spray cleansing and degreasing systems for the preparation of component
parts as part of manufacturing or refurbishment process.
BENEFITS:
Very
effective against heavier contamination deposits. Lasts longer than conventional
cleaners. Non-foaming must be used
above 50°C.
Inbuilt short-term corrosion inhibition system.
Prevents oil and grease build-up in equipment.
Keeps machinery cleaner during use giving reduced maintenance costs for
the equipment. Very effective and economical in use.
Can be used on aluminium, brass and copper for heavier contamination
removal.
DILUTION
RATES:
Effective
use up to 100:1
General
use 20:1
PACKAGING:
25
and 205 litre non-returnable containers
SAFETY
DATA SHEET
1.
IDENTIFICATION OF THE PREPARATION
SUBSTANCE NAME:
HYDROBREAKÒ
HD
COMPANY IDENTIFICATION:
TechnoSol Limited
EMERGENCY TELEPHONE NUMBER:
+372 51 61 403
2.
COMPOSITION/INFORMATION ON INGREDIENTS
INGREDIENT NAME:
CONTENTS
HEALTH
RISK
(class)
(R No.)
An aqueous blend of
surfactants and inhibitors
Xi
36,38
3.
HAZARDS IDENTIFICATION:
Irritating to skin and eyes.
4.
FIRST AID MEASURES:
EYES:
Promptly wash eyes with lots of water while lifting the eye lids.
Get medical attention immediately. Continue to rinse.
SKIN:
Remove affected person from source of contamination.
Promptly flush contaminated skin with soap or mild detergent and water.
Promptly remove clothing if penetrated
and flush the skin with water. Get
medical attention if irritation persists after washing.
INHALATION:
In the unlikely event of inhalation caused by faulty work practices, move
the exposed person to fresh air at once. Perform
artificial respiration if breathing has stopped.
Keep the affected person warm and at rest.
Get prompt medical attention.
INGESTION:
NEVER MAKE UNCONSCIOUS PERSON VOMIT OR DRINK FLUIDS. If person is
conscious, let affected person drink lots of water to dilute the swallowed
chemical. Seek medical attention.
5.
FIRE FIGHTING MEASURES
EXTINGUISHING MEDIA:
“alcohol” foam carbon dioxide (CO2), dry chemicals, sand,
dolomite, etc. are unaffected by HYDROBREAKÒ
HD
SPECIAL FIRE FIGHTING:
Use water to keep exposed containers cool
PROCEDURES:
and disperse vapours. Water
spray may be used to flush spills away from exposures and dilute spills.
HAZARDOUS DECOMPOSITION
Toxic gases/vapours/fumes of carbon
PRODUCTS:
monoxide (CO) could be given off under extreme conditions
6.
ACCIDENTAL RELEASE MEASURES
SPILL CLEAN-UP METHODS:
Ventilate. Clean-up
personnel should use liquid contact protection.
Wash thoroughly after dealing with spillage.
SMALL SPILLS:
Absorb onto sand or other inert material and sweep up into suitable
container.
LARGE SPILLS:
Prevent the spillage from entering drains, ditches and rivers by use of
cellulose absorbents, sand or earth. Inform
local authorities if this cannot be prevented.
7.
HANDLING AND STORAGE
USAGE PRECAUTIONS:
Avoid spillage, skin and eye contact.
Avoid forming mists or fogs.
STORAGE PRECAUTIONS:
Store in plastic containers at temperatures above 0 degrees C. Keep
containers closed during storage.
8.
EXPOSURE CONTROLS AND PERSONAL PROTECTION
INGREDIENT NAME:
STD
LT EXP
ST EXP
(8 hrs.)
(10 min.)
PROTECTIVE EQUIPMENT:
Gloves and goggles should be worn when handling any chemical
RESPIRATORS:
No specific recommendations made.
PROTECTIVE GLOVES:
Use suitable protective gloves if risk of skin contact.
EYE PROTECTION:
Wear splash-proof eye goggles to prevent any possibility of eye contact.
9.
PHYSICAL AND CHEMICAL PROPERTIES
APPEARANCE:
Clear liquid
COLOUR:
None
ODOUR/TASTE:
Slight
SOLUBILITY DESCRIPTION:
Miscible with water
SPECIFIC GRAVITY (Water = 1):
1.0395 @ 20C
FLASH POINT (C):
>65 degree C. This
product is non-flammable
FLASH POINT METHOD:
TCC (Tag closed cup)
pH value:
10 +/- 1.0
10.
STABILITY AND REACTIVITY
STABILITY:
No particular stability concerns
MATERIALS TO AVOID:
None
HAZARDOUS DECOMPOSITION
Toxic gases/vapours/fumes of carbon
PRODUCTS
monoxide (CO) could be given off under extreme conditions
11.
TOXICOLOGICAL INFORMATION
TOXIC DOSE 1 (LD 50):
No information available
TOXIC CONS. (LC 50):
HEALTH WARNINGS:
May be an irritant of eyes and mucous membranes
HEALTH SYMPTOMS:
Irritation of eyes and mucous membranes
ACUTE AND CHRONIC
No known chronic or acute health risks
HEALTH HAZARDS:
12.
ECOLOGICAL INFORMATION
DEGRADABILITY:
No information available.
ACUTE FISH TOXICITY:
No information available
WATER HAZARD
May be slight pollutants based on
CLASSIFICATION:
reactants
13.
DISPOSAL CONDITIONS
DISPOSAL METHODS:
Confirm disposal procedures with environmental engineer and local
regulations
14.
TRANSPORT INFORMATION
UD No.:
This product is not considered hazardous
ADR CLASS No.:
for transport
AIR TRANSPORT CLASS:
-
AIR SUB-CLASS:
-
AIR PACK GR.:
-
HAZCHEM CODE:
-
SEA TRANSPORT CLASS No.:
-
SEA PACK GR.:
-
RAIL TRANSPORT CLASS No.:
-
CEFIC TEC (R) No.:
-
UK LABEL FOR CONVEYANCE:
-
INTERNATIONAL COMMODITY CODE
3402 9010
15.
REGULATORY INFORMATION
LABEL FOR SUPPLY:
IRRITANT
RISK PHRASES:
36/38 Irritating
to skin and eyes
SAFETY PHRASES:
37/39 Wear
suitable gloves and eye protection
26
In case of contact with eyes wash immediately with plenty of water and
seek medical advice
28
After contact with skin wash immediately with plenty of water.
UK REGULATORY REFERENCES:
Health And Safety At Work Act 1974. The Control of Substances Hazardous
to Health Regulations 1988 Chemical (Hazard Information and Packaging)
Regulations
16.
OTHER INFORMATION
USER NOTES:
REVISION DATE:
1.10.00
REVISION NO./REPLACES
1/All previous health and safety
COMMENTS:
New data sheet to CHIP format
DISCLAIMER
THIS
INFORMATION RELATES ONLY TO THE SPECIFIC MATERIAL DESIGNATED AND MAY NOT BE
VALID FOR SUCH MATERIAL USED IN COMBINATION WITH ANY OTHER MATERIALS OR IN ANY
PROCESS. SUCH INFORMATION IS, TO
THE BEST OF THE COMPANY’S KNOWLEDGE AND BELIEF, ACCURATE AND RELIABLE AS
OF THE DATE INDICATED. HOWEVER, NOR
WARRANTY, GUARANTEE OR REPRESENTATION IS MADE AS TO ITS ACCURACY, RELIABILITY OR
COMPLETENESS. IT IS THE
USER’S RESPONSIBILITY TO SATISFY HIMSELF AS TO THE SUITABILITY OF SUCH
INFORMATION FOR HIS OWN PARTICULAR USE.
|
||||||||||||||||||||
Technosol Ltd. Phone: +37 251 61 403 Fax: +37 26 777 937 E-mail: office@hydrobreak.com E-mail: sales@hydrobreak.com |